www.41by.cn-高潮又爽又大又黄无遮挡免费,久久精品久久精品中文字幕,国产精品白丝久久AV网站,久久精品国产久精国产

  • <tr id="6iomg"><tbody id="6iomg"></tbody></tr>
    <tr id="6iomg"><center id="6iomg"></center></tr>
  • 02131

    1/2" Dr. Air Impact Wrench

    Introduction

      Enhanced lower edge of the impact spindle, extending the service life
      Downward exhaust design, preventing the exhaust gas from blowing to workpieces and operators
      Four coarse-threaded bolts for connection of front and rear sections, ensuring the firmness of the body
      Double-hammer impact structure, ensuring high torque and fast torque output
      Continuously variable speed trigger, convenient for initial locating at start-up
      Air tools warranty
      -Warranty scope
      Subject to the regulations specified in the following Section "Non-warranty scope", all air tools marked with SATA trademark are provided with a 3-month warranty period from the date of purchase, and during normal use, if the functions are impaired, they can be repaired or even replaced at the SATA designated service center for free. The repaired or replaced ones are still covered under this warranty within the remaining warranty period.
      -Non-warranty scope
      The air tools without the SATA trademark are not covered under free warranty. Any damage caused by abnormal use is not covered under free warranty.
      The wears caused by the product fatigue due to continuous use are not covered under free warranty.
      The repair or unauthorized disassembly by non-SATA designated service center, or the damage caused by use of non-SATA parts are not covered under free warranty.
      If the product has rust, plating peeling off, surface scratches, or broken plastic handles after use, it will not be repaired or replaced under warranty.
      If the product warranty card fails to be provided within the specified time, the product will not be repaired or replaced under free warranty.
      -About replacement or repair
      The user shall fill in the “SATA Air Tools Warranty Card Receipt” completely within one month from the date of purchasing the SATA air tools (namely, 30 days from the date on the proof of purchase, the date of postmark on the product parcel sent at the time of purchase shall prevail), and post it together with a copy of a valid proof of purchase to SATA. Overdue shall be deemed as waiver of warranty.
      For the product damaged during the warranty period, please bring the original or copy of the proof of purchase to the nearest SATA designated service center for free repair and even replacement.
      -Service and counsel
      If you do not understand the warranty clauses of the SATA air tools, or you are not satisfied with the services provided at the designated service center, you can contact SATA Tools (Shanghai) Co., Ltd.: (021) 6061 1919 or 400 820 3885, 800 820 3885
      -Interpretation right
      SATA Tools (Shanghai) Co., Ltd. reserves the interpretation right of above clauses.

    Product Details

    Product No 02131
    MADE IN Taiwan,China
    Output specification 1/2"square-head
    Operating torque(N·M) 40-435
    Maximum reverse torque(N·M) 748
    Idle speed(RPM) 8000
    Tightening bolt capacity M16
    Average air consumption(CFM) 4.2
    Noise level dB(A) 92.5
    Length(mm) 187
    Width(mm) 190
    Height(mm) 71
    Net Weight(kg) 2.64
    Air Inlet Size 1/4"
    Minimum endotracheal diameter(mm) 10
    Working air pressure(KGF/CM2) 6.35
    Vibrancy(M/S2) 12
    Warranty Terms Three months warranty, pneumatic tools warranty terms, please see 'Introduction'
    Special note Noise level is A sound pressure level. Working pressure refers to the dynamic pressure measured at the product inlet when the product is idling. Tightening bolt capacity refers to standard torque that meets the specifications of DIN267 grade 8.8 bolts

    Related Products

    Download Our Catalog
    日韩a级毛片无码免费| 国产偷窥熟女精品视频大全| 特级精品毛片免费观看| 国精产品ZZLG77777| 麻花视频在线观看电视剧恋爱真好| 久久人人爽人人爽人人片aV中文| 私人家庭影院5577| 国产午夜欧美忘忧草| 亚洲性夜夜综合久久7777| 国产精品毛片a∨一区二区三区|